The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC BODY, body_style: IN-THE-LINE, special_features: ASSEMBLY REQUIRED; WIRE GAGE 16; MAY ALSO CONTAIN COUPLE GUARD AND CAP PLUG, voltage_in_volts: 24.0, surface_treatment: TIN TERMINAL, end_item_identification: XM987 AND M993. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 2540-00-628-0975, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC PHENOLIC BODY |
| body_style | IN-THE-LINE |
| special_features | ASSEMBLY REQUIRED; WIRE GAGE 16; MAY ALSO CONTAIN COUPLE GUARD AND CAP PLUG |
| voltage_in_volts | 24.0 |
| surface_treatment | TIN TERMINAL |
| end_item_identification | XM987 AND M993 |
| environmental_protection | WATERTIGHT |
| terminal_type_and_quantity | 2 WIRE LEAD W/LUG |
| fuse_accommodation_quantity | 1 |
| specification/standard_data | 96906-DOD-STD-100 GOVERNMENT STANDARD AND 80204-ANSI Y14.5-1973 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| interruption_indicator_method | ALARM/VISUAL INDICATING |
| fuse_terminal_type_accommodated | FERRULE |
| NSN | 2540-00-628-0975 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT AND PIVOT, WINDSHIELD WIPER |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | SHAFT 0.625 IN. DIA,BUTADIENE FIBER WASHER 62138,STEEL WASHER 62139,NUT 60705,RUBBER CAP 75675,KNURLED DRIVER 72 TEETH 80017,NUT CAP 60825,LOCKWASHER 62154,2 MTG HOLES 0.196 IN. DIA,C TO C DISTANCE BETWEEN MTG HOLES 1.250 IN.,1.000 IN. MAJOR LG IN |
| END ITEM IDENTIFICATION | XM987 AND M993 |
| SPECIFICATION/STANDARD DATA | 96906-DOD-STD-100 GOVERNMENT STANDARD AND 80204-ANSI Y14.5-1973 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SUPPLEMENTARY FEATURES | ALL MATERIALS SHALL BE OF A CORROSION RESISTING TYPE OR SUITABLY PROTECTED TO ENDURE A 72 HOUR MINIMUM SALT SPRAY TEST PER ASTM B117; VISIBLE CORROSION IS ACCEPTABLE AS LONG AS PIVOT ASSEMBLY REMAINS FULLY FUNCTIONAL; PIVOT ASSEMBLY MUST ROTATE WHEN INITIALLY SUBJECTED TO A 15"/LBS MAXIMUM TORQUE AFTER INITIAL ROTATION; IT MUST ROTATE WITH A MAXIMUM OF 8"/LBS TORQUE |
| SPECIAL FEATURES | PERFORMANCE REQUIREMENTS: PIVOT ASSEMBLY MUST FUNCTION PROPERLY WITHIN -25 DEGREES FAHRENHEIT TO +125 DEGREES FAHRENHEIT TEMPERATURE RANGE AND WITHSTAND STORAGE AT -60 DEGREES FAHRENHEIT WITHOUT DAMAGE OR DETERIORATION |