PartsTable
Technical Data Sheet
PartsTable / MRO / 30076
30076 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a Clementoni industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.016 INCHES NOMINAL IN, body_length: 4.250 INCHES NOMINAL IN, body_diameter: 1.125 INCHES NOMINAL IN, hole_diameter: 0.248 INCHES MINIMUM AND 0.258 INCHES MAXIMUM IN, overall_width: 0.562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0305, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30076
NSN: 3110-00-100-0305
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.016 INCHES NOMINAL IN
body_length4.250 INCHES NOMINAL IN
body_diameter1.125 INCHES NOMINAL IN
hole_diameter0.248 INCHES MINIMUM AND 0.258 INCHES MAXIMUM IN
overall_width0.562 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
inclosure_typeUNINCLOSED
inside_diameter1.812 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
terminal_length0.562 INCHES NOMINAL IN
overall_diameter0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
special_featuresUSED ON VALVE 48180-5
NSN3110-00-100-0305
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30076 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
5295Interchangeable
interchangeable cross-reference
interchangeable
93-400Interchangeable
interchangeable cross-reference
interchangeable
1771669Interchangeable
interchangeable cross-reference
interchangeable
108931Interchangeable
interchangeable cross-reference
interchangeable
108946Interchangeable
interchangeable cross-reference
interchangeable
394AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30076?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30076?
30076 is a RESISTOR,FIXED,WIRE WOUND manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30076?
There are 20 known substitutes for 30076: 5295, 93-400, 1771669 and 17 more. Substitute compatibility should be verified for your specific system.
Is 30076 still available?
30076 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30076

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026