PartsTable
Technical Data Sheet
Download PDF

3007035 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3007035: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.780 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN, bolt_circle_diameter: 1.300 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-841-0886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3007035
NSN: 5330-00-841-0886
NIINs: 008410886, 012228779
FSC: 5330 — Packing and Gasket Materials
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.780 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
bolt_hole_quantity2
bolt_circle_diameter1.300 INCHES NOMINAL IN
outside_corner_radius0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
cross-sectional_thickness0.023 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
NSN5330-00-841-0886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3007035 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.023 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.023 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.780 INCHES NOMINAL IN
APERTURE DIAMETER0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.300 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3007035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3007035?
3007035 is a GASKET.
What is the NSN for 3007035?
3007035 is cataloged in the U.S. Government catalog under NSN 5330-00-841-0886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3007035

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.