PartsTable
Technical Data Sheet
Download PDF

3004M60P04 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3004M60P04: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: SILVER OVERALL, nut_height: 0.344 INCHES NOMINAL IN, nut_diameter: 0.356 INCHES NOMINAL IN, pilot_length: 0.062 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-956-6587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3004M60P04
NSN: 5310-00-956-6587
FSC: 5310 — Nuts and Washers
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSILVER OVERALL
nut_height0.344 INCHES NOMINAL IN
nut_diameter0.356 INCHES NOMINAL IN
pilot_length0.062 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
pilot_diameter0.219 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
precious_materialSILVER
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-956-6587
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3004M60P04 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
PRECIOUS MATERIAL: SILVER
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.356 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 07482-3004-60+1 MANUFACTURERS SOURCE CONTROL
•
PILOT DIAMETER: 0.219 INCHES NOMINAL IN
•
PILOT LENGTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
PRECIOUS MATERIALSILVER
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.356 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA07482-3004-60+1 MANUFACTURERS SOURCE CONTROL
PILOT DIAMETER0.219 INCHES NOMINAL IN
PILOT LENGTH0.062 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.344 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
3004M60P1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ZL-8415-5-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
K19345-3-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ZL2969-5-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
K19345-4-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3004M60P04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3004M60P04?
3004M60P04 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 3004M60P04?
There are 5 known substitutes for 3004M60P04: 3004M60P1, ZL-8415-5-02, K19345-3-5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3004M60P04?
3004M60P04 is cataloged in the U.S. Government catalog under NSN 5310-00-956-6587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3004M60P04

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.