PartsTable
Technical Data Sheet
Download PDF

30048 PIECE 14 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30048 PIECE 14: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hardness_rating: 110.0 BRINELL HULTGREN MAXIMUM OVERALL, outside_diameter: 6.866 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 6.130 INCHES MINIMUM AND 6.140 INCHES MAXIMUM IN, precious_material: SILVER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-204-3940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30048 PIECE 14
NSN: 5330-01-204-3940
FSC: 5330 — Packing and Gasket Materials
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hardness_rating110.0 BRINELL HULTGREN MAXIMUM OVERALL
outside_diameter6.866 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter6.130 INCHES MINIMUM AND 6.140 INCHES MAXIMUM IN
precious_materialSILVER
surface_treatmentSILVER OVERALL
precious_material_and_locationEXTERNAL SURFACES SILVER
NSN5330-01-204-3940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30048 PIECE 14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRECIOUS MATERIAL: SILVER
•
HARDNESS RATING: 110.0 BRINELL HULTGREN MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 6.866 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 6.130 INCHES MINIMUM AND 6.140 INCHES MAXIMUM IN
•
SURFACE TREATMENT: SILVER OVERALL
•
PRECIOUS MATERIAL AND LOCATION: EXTERNAL SURFACES SILVER
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
PRECIOUS MATERIALSILVER
HARDNESS RATING110.0 BRINELL HULTGREN MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER6.866 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN
APERTURE DIAMETER6.130 INCHES MINIMUM AND 6.140 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
PRECIOUS MATERIAL AND LOCATIONEXTERNAL SURFACES SILVER
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
30048-14Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30048 PIECE 14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30048 PIECE 14?
30048 PIECE 14 is a GASKET.
What parts can replace 30048 PIECE 14?
There is 1 known substitute for 30048 PIECE 14: 30048-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 30048 PIECE 14?
30048 PIECE 14 is cataloged in the U.S. Government catalog under NSN 5330-01-204-3940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30048 PIECE 14