PartsTable
Technical Data Sheet
Download PDF

3004261 — 3004261

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3004261: 3004261.

The 3004261 is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 35.0 DEGREES NOMINAL, first_leg_style: ANGLE, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.938 INCHES NOMINAL IN, second_leg_angle: 35.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-080-6654, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3004261
NSN: 5340-01-080-6654
NIINs: 010806654, 016975416
FSC: 5340 — Hardware, Commercial
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle35.0 DEGREES NOMINAL
first_leg_styleANGLE
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length0.938 INCHES NOMINAL IN
second_leg_angle35.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width1.000 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
second_leg_length1.938 INCHES NOMINAL IN
fabrication_methodFORMED
mounting_hole_typePLAIN
NSN5340-01-080-6654
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3004261 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.438 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.438 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 35.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.250 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 35.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.625 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.438 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.438 INCHES NOMINAL IN
FIRST LEG ANGLE35.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.250 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE35.0 DEGREES NOMINAL
SECOND LEG WIDTH1.000 INCHES NOMINAL IN
SECOND LEG LENGTH1.938 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.688 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3004261?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3004261?
3004261 is a 3004261. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 3004261?
3004261 is cataloged in the U.S. Government catalog under NSN 5340-01-080-6654. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3004261

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.