PartsTable
Technical Data Sheet
Download PDF

300218-1 — LIGHT EMITTING DIODE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

300218-1: LIGHT EMITTING DIODE.

The LIGHT EMITTING DIODE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, light_function: WING TIP CLEARANCE, special_features: LEFT HAND WING, center_hole_diameter: 0.468 INCHES NOMINAL IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, end_item_identification: AN/PVS-7B NIGHT VISION GOGGLE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-882-8874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
300218-1
NSN: 5331-00-882-8874
NIINs: 008828874, 011433406, 013755457
FSC: 5331 — O-ring
CAGE: 58163 — MEGGITT (NORTH HOLLYWOOD), INC. DBA MEGGITT CONTROL SYSTEMS DIV MEGGITT DEFENSE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
light_functionWING TIP CLEARANCE
special_featuresLEFT HAND WING
center_hole_diameter0.468 INCHES NOMINAL IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
end_item_identificationAN/PVS-7B NIGHT VISION GOGGLE
voltage_rating_in_volts28.0 DC NOMINAL
lamp_type_accommodated_and_quantity1 FLASHTUBE
NSN5331-00-882-8874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 300218-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.468 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.468 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
9167664-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 300218-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 300218-1?
300218-1 is a LIGHT EMITTING DIODE.
What parts can replace 300218-1?
There is 1 known substitute for 300218-1: 9167664-30. Substitute compatibility should be verified for your specific system.
What is the NSN for 300218-1?
300218-1 is cataloged in the U.S. Government catalog under NSN 5331-00-882-8874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 300218-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.