PartsTable
Technical Data Sheet
Download PDF

3001V26 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3001V26: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.984 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN, shaft_runout: 0.001 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-716-0730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3001V26
NSN: 5905-00-716-0730
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length0.984 INCHES MAXIMUM IN
shaft_styleROUND
pilot_length0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.875 INCHES NOMINAL IN
lateral_runout0.001 INCHES IN
pilot_diameter2.8745 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
shaft_diameter0.250 INCHES NOMINAL IN
shaft_end_play0.00500 INCHES IN
NSN5905-00-716-0730
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 3001V26 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.50 INCH-OUNCES IN
•
BODY DIAMETER: 2.875 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.001 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 95.0 SINGLE SECTION
•
UNDERCUT WIDTH: 0.0730 INCHES NOMINAL IN
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.50 INCH-OUNCES IN
BODY DIAMETER2.875 INCHES NOMINAL IN
LATERAL RUNOUT0.001 INCHES IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER95.0 SINGLE SECTION
UNDERCUT WIDTH0.0730 INCHES NOMINAL IN
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER2.875 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1023366Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 3001V26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3001V26?
3001V26 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3001V26?
There is 1 known substitute for 3001V26: 1023366. Substitute compatibility should be verified for your specific system.
What is the NSN for 3001V26?
3001V26 is cataloged in the U.S. Government catalog under NSN 5905-00-716-0730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3001V26

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.