PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3001482-3
3001482-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, center_hole_diameter: 5.505 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN, cross-sectional_height: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-3063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3001482-3
NSN: 5330-00-353-3063
FSC: 5330
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
center_hole_diameter5.505 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
cross-sectional_height0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-00-353-3063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3001482-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 5.505 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER5.505 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1482Interchangeable
interchangeable cross-reference
interchangeable
07-342Interchangeable
interchangeable cross-reference
interchangeable
SB97Interchangeable
interchangeable cross-reference
interchangeable
AE1482Interchangeable
interchangeable cross-reference
interchangeable
HL-423Interchangeable
interchangeable cross-reference
interchangeable
327Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3001482-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3001482-3?
3001482-3 is a PACKING,PREFORMED.
What parts can replace 3001482-3?
There are 15 known substitutes for 3001482-3: 1482, 07-342, SB97 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3001482-3?
3001482-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-3063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3001482-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026