PartsTable
Technical Data Sheet
PartsTable / MRO / 30013
30013 ✓ Verified by PartsTable
Bestway · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: SILICONE, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, switch_type: ROTARY, coil_quantity: 11, overall_width: 1.880 INCHES NOMINAL IN, physical_form: PASTE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0598, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30013
NSN: 3110-00-100-0598
FSC: 3110
CAGE: 61361 — REXWORKS INC (USA)
SPECIFICATIONS
materialSILICONE
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
switch_typeROTARY
coil_quantity11
overall_width1.880 INCHES NOMINAL IN
physical_formPASTE
inclosure_typeUNINCLOSED
nose_end_width1.500 INCHES NOMINAL IN
overall_height2.288 INCHES NOMINAL IN
overall_length2.410 INCHES NOMINAL IN
inside_diameter0.410 INCHES NOMINAL IN
mounting_methodHOLE
NSN3110-00-100-0598
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30013 · Bestway ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0310 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 3.7500 INCHES MINIMUM AND 3.7510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0310 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OVERALL WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER3.7500 INCHES MINIMUM AND 3.7510 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
5337-5Interchangeable
interchangeable cross-reference
interchangeable
N233Interchangeable
interchangeable cross-reference
interchangeable
15-233Interchangeable
interchangeable cross-reference
interchangeable
51800000Interchangeable
interchangeable cross-reference
interchangeable
1034-2Interchangeable
interchangeable cross-reference
interchangeable
40253Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30013?
30013 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Bestway. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30013?
There are 25 known substitutes for 30013: 5337-5, N233, 15-233 and 22 more. Substitute compatibility should be verified for your specific system.
Is 30013 still available?
30013 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30013

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026