PartsTable
Technical Data Sheet
Download PDF

300127-100L1 — GASKET AND SEAL SET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

300127-100L1: GASKET AND SEAL SET.

The GASKET AND SEAL SET is a the manufacturer industrial component. Key specifications include end_item_identification: COUPLING FLEX, TYPE I, 1.500 IPS, criticality_code_justification: ZZZY, part_name_assigned_by_controlling_agency: SEAL ASSEMBLY, reference_number_differentiating_characteristics: MATERIAL CONROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONROL STANDARD FOR LEVEL I ITEMS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-540-8190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
300127-100L1
NSN: 5330-01-540-8190
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
end_item_identificationCOUPLING FLEX, TYPE I, 1.500 IPS
criticality_code_justificationZZZY
part_name_assigned_by_controlling_agencySEAL ASSEMBLY
reference_number_differentiating_characteristicsMATERIAL CONROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONROL STANDARD FOR LEVEL I ITEMS
NSN5330-01-540-8190
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 300127-100L1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL CONROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONROL STANDARD FOR LEVEL I ITEMS
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONZZZY
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL ASSEMBLY
END ITEM IDENTIFICATIONCOUPLING FLEX, TYPE I, 1.500 IPS
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL CONROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONROL STANDARD FOR LEVEL I ITEMS
SUBSTITUTES & CROSS-REFERENCES 3
300127-100Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
300103ITEM2L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
300103ITEM2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 300127-100L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 300127-100L1?
300127-100L1 is a GASKET AND SEAL SET.
What parts can replace 300127-100L1?
There are 3 known substitutes for 300127-100L1: 300127-100, 300103ITEM2L1, 300103ITEM2. Substitute compatibility should be verified for your specific system.
What is the NSN for 300127-100L1?
300127-100L1 is cataloged in the U.S. Government catalog under NSN 5330-01-540-8190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 300127-100L1