PartsTable
Technical Data Sheet
Download PDF

3000314 — DUMMY CONNECTOR,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3000314: DUMMY CONNECTOR,PLUG.

The DUMMY CONNECTOR,PLUG is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.262 INCHES NOMINAL IN, center_hole_diameter: 1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-263-5173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3000314
NSN: 5331-00-263-5173
NIINs: 002635173, 014614778
FSC: 5331 — O-ring
CAGE: S4956 — EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA (BRA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating65.0 SHORE DUROMETER A NOMINAL
outside_diameter2.262 INCHES NOMINAL IN
center_hole_diameter1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
elongation_percentage200 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationAN/GYQ-79
NSN5331-00-263-5173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3000314 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.262 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.262 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 7
SAE AS29513-226Reference document
Same NSN cross-reference
Reference document — Secondary reference
TF3929Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-226Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S-P-101-141Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10163239Reference document
Same NSN cross-reference
Reference document — Informative reference only
5331PL0143710Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 3000314?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3000314?
3000314 is a DUMMY CONNECTOR,PLUG.
What parts can replace 3000314?
There are 7 known substitutes for 3000314: SAE AS29513-226, TF3929, MS29513-226 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3000314?
3000314 is cataloged in the U.S. Government catalog under NSN 5331-00-263-5173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3000314

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.