PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 300 1307
300 1307 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 16.0 MILLIMETERS NOMINAL MM, overall_diameter: 30.0 MILLIMETERS NOMINAL MM, special_features: 16MM ID X 30MM OD DIN 6916 STRUCTURAL FLAT WASHER MM, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-268-9093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
300 1307
NSN: 5305-01-268-9093
FSC: 5305
CAGE: 5E074 — HOWCO DISTRIBUTING CO. DBA HOWCO DISTRIBUTING CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter16.0 MILLIMETERS NOMINAL MM
overall_diameter30.0 MILLIMETERS NOMINAL MM
special_features16MM ID X 30MM OD DIN 6916 STRUCTURAL FLAT WASHER MM
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2355-01-532-2174 JOINT EOD RAPID RESPONSE VEHICLE (JERRV); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
part_name_assigned_by_controlling_agencyWASHER, FLAT
NSN5305-01-268-9093
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 300 1307 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 14
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.437 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD QUANTITY PER INCH14
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.437 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
12759-00395Interchangeable
interchangeable cross-reference
interchangeable
34882Interchangeable
interchangeable cross-reference
interchangeable
3001307Interchangeable
interchangeable cross-reference
interchangeable
300V1307Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 300 1307?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 300 1307?
300 1307 is a WASHER,FLAT.
What parts can replace 300 1307?
There are 4 known substitutes for 300 1307: 12759-00395, 34882, 3001307 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 300 1307?
300 1307 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-268-9093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 300 1307

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026