PartsTable
Technical Data Sheet
Download PDF

30-9001 — CLAMP,CARDIOVASCULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

30-9001: CLAMP,CARDIOVASCULAR.

The CLAMP,CARDIOVASCULAR is a the manufacturer industrial component. Key specifications include width: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, height: 0.195 INCHES NOMINAL IN, length: 0.140 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, dial_size: 4-1/2 IN. DIA IN, bezel_type: SNAP-ON.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-020-3126, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30-9001
NSN: 5340-00-020-3126
NIINs: 000203126, 006815372, 007836614, 010291336, 011893299, 014239135, 015197203
FSC: 5340 — Hardware, Commercial
CAGE: 07CR8 — ADVANCED LOGIC RESOURCES INC DBA ALR (USA)
SPECIFICATIONS
width0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
height0.195 INCHES NOMINAL IN
length0.140 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
dial_size4-1/2 IN. DIA IN
bezel_typeSNAP-ON
scale_namePRESSURE-VACUUM
scale_typeMULTIPLE
body_length0.594 INCHES NOMINAL IN
scale_range+0.0 TO 30.0 INCHES OF MERCURY AND +0.0 TO 150.0 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_typeINDICATING
adjustabilityADJUSTABLE
NSN5340-00-020-3126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-9001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.140 INCHES NOMINAL IN
•
HEIGHT: 0.195 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR PASSIVATE
•
WIDTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OR STEEL COMP 303
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.140 INCHES NOMINAL IN
HEIGHT0.195 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR PASSIVATE
WIDTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OR STEEL COMP 303
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 30-9001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-9001?
30-9001 is a CLAMP,CARDIOVASCULAR. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 30-9001?
30-9001 is cataloged in the U.S. Government catalog under NSN 5340-00-020-3126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-9001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.