PartsTable
Technical Data Sheet
Download PDF

30-3P — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

30-3P: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include diameter: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, bore_shape: STRAIGHT, body_length: 0.312 INCHES NOMINAL IN, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-554-3355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-3P
NSN: 3110-00-554-3355
NIINs: 005543355, 006439642
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
diameter1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
bore_shapeSTRAIGHT
body_length0.312 INCHES NOMINAL IN
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
terminal_typeTAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
load_directionRADIAL
surface_finishGROUND
insert_materialPLASTIC SINGLE MATING END
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
NSN3110-00-554-3355
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30-3P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 10
24-33WReference document
Same NSN cross-reference
Reference document — Secondary reference
22-44SMReference document
Same NSN cross-reference
Reference document — Secondary reference
24-4GReference document
Same NSN cross-reference
Reference document — Secondary reference
534-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
24-3GReference document
Same NSN cross-reference
Reference document — Secondary reference
177002-95Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 30-3P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-3P?
30-3P is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 30-3P?
There are 10 known substitutes for 30-3P: 24-33W, 22-44SM, 24-4G and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-3P?
30-3P is cataloged in the U.S. Government catalog under NSN 3110-00-554-3355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-3P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.