PartsTable
Technical Data Sheet
Download PDF

30-302-3D07G14 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30-302-3D07G14: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY BAND, loop_width: 0.438 INCHES NOMINAL IN, loop_length: 0.875 INCHES NOMINAL IN, overall_width: 0.775 INCHES NOMINAL IN, style_designator: RECTANGULAR, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-595-6437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-302-3D07G14
NSN: 5340-01-595-6437
FSC: 5340 — Hardware, Commercial
CAGE: 69370 — HO-HO-KUS, INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY BAND
loop_width0.438 INCHES NOMINAL IN
loop_length0.875 INCHES NOMINAL IN
overall_width0.775 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness0.050 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.098 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.848 INCHES NOMINAL IN
NSN5340-01-595-6437
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-302-3D07G14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.438 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.098 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.848 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY BAND
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.438 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL WIDTH0.775 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.098 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.848 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
LOOP LENGTH0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30-302-3D07G14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-302-3D07G14?
30-302-3D07G14 is a CLAMP,LOOP.
What is the NSN for 30-302-3D07G14?
30-302-3D07G14 is cataloged in the U.S. Government catalog under NSN 5340-01-595-6437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-302-3D07G14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.