PartsTable
Technical Data Sheet
Download PDF

30-302-1D04G11 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30-302-1D04G11: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.209 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BUCKLE/CLIP, loop_width: 0.250 INCHES NOMINAL IN, loop_length: 0.688 INCHES NOMINAL IN, overall_width: 0.650 INCHES NOMINAL IN, special_features: CUSHIONED, BLACK WITH BLUE IDENTIFIERS. CLAMPS INTENDED TO SECURE FLAT WIRE, OR RIBBON CABLE BUNDELS..

This part is cataloged in the U.S. Government catalog under NSN 5340-01-482-6819, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-302-1D04G11
NSN: 5340-01-482-6819
FSC: 5340 — Hardware, Commercial
CAGE: 69370 — HO-HO-KUS, INC (USA)
SPECIFICATIONS
diameter0.209 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BUCKLE/CLIP
loop_width0.250 INCHES NOMINAL IN
loop_length0.688 INCHES NOMINAL IN
overall_width0.650 INCHES NOMINAL IN
special_featuresCUSHIONED, BLACK WITH BLUE IDENTIFIERS. CLAMPS INTENDED TO SECURE FLAT WIRE, OR RIBBON CABLE BUNDELS.
style_designatorRECTANGULAR
tongue_hole_typeROUND, UNTHREADED
surface_treatmentALUMINUM BUCKLE/CLIP
material_thickness0.032 INCHES NOMINAL IN
end_item_identificationV22
criticality_code_justificationAGAV
NSN5340-01-482-6819
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-302-1D04G11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE BUCKLE/CLIP A
•
LOOP WIDTH: 0.250 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-8603 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.209 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE BUCKLE/CLIP A
LOOP WIDTH0.250 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONAGAV
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-8603 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 TREATED TO T4 PER MIL-H-6088 FED SPEC SINGLE MATERIAL RESPONSE BUCKLE/CLIP
DIAMETER0.209 INCHES NOMINAL IN
OVERALL WIDTH0.650 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.972 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30-302-1D04G11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-302-1D04G11?
30-302-1D04G11 is a CLAMP,LOOP.
What is the NSN for 30-302-1D04G11?
30-302-1D04G11 is cataloged in the U.S. Government catalog under NSN 5340-01-482-6819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-302-1D04G11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.