PartsTable
Technical Data Sheet
PartsTable / MRO / 30-249
30-249 ✓ Verified by PartsTable
Aquabeads · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This high-end leather case offers great protection for the camera. It has a top cover with a magnet closure for quick access. Comes with a belt loop.

Key specifications include phase: SINGLE OUTPUT, diameter: 0.219 INCHES NOMINAL IN, material: STEEL, body_style: CYLINDRICAL BUSHING MOUNTED, cut_length: 0.625 INCHES NOMINAL IN, duty_cycle: CONTINUOUS. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0524, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30-249
NSN: 3110-00-100-0524
FSC: 3110
CAGE: 04627 — HYSTER-YALE GROUP, INC. DIV HYSTER-YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
phaseSINGLE OUTPUT
diameter0.219 INCHES NOMINAL IN
materialSTEEL
body_styleCYLINDRICAL BUSHING MOUNTED
cut_length0.625 INCHES NOMINAL IN
duty_cycleCONTINUOUS
leg_length1.938 INCHES NOMINAL FIRST END IN
seat_angle30.0 DEGREES SECOND END
shank_typeWELDON
body_length1.156 INCHES MAXIMUM IN
design_formSINGLE END
shaft_styleROUND
NSN3110-00-100-0524
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30-249 · Aquabeads ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 2.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0625 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER2.2500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OVERALL WIDTH0.5313 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
8180000049Interchangeable
interchangeable cross-reference
interchangeable
15520Interchangeable
interchangeable cross-reference
interchangeable
2820Interchangeable
interchangeable cross-reference
interchangeable
64AX153Interchangeable
interchangeable cross-reference
interchangeable
6313-2ZInterchangeable
interchangeable cross-reference
interchangeable
658C03X30X26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-249?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-249?
30-249 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Aquabeads. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30-249?
There are 25 known substitutes for 30-249: 8180000049, 15520, 2820 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-249?
30-249 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0524. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-249

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026