PartsTable
Technical Data Sheet
PartsTable / MRO / 30-2010
30-2010 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, tip_type: BULBOUS, cup_width: 0.6875 INCHES NOMINAL IN, cone_width: 0.8480 INCHES NOMINAL IN, handle_type: SPATULATE, bore_diameter: 0.7500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7458, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30-2010
NSN: 3110-00-155-7458
FSC: 3110
CAGE: 31568 — TEXTRON INC JACOBSEN DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
tip_typeBULBOUS
cup_width0.6875 INCHES NOMINAL IN
cone_width0.8480 INCHES NOMINAL IN
handle_typeSPATULATE
bore_diameter0.7500 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
actuator_styleROUND
inclosure_typeFULLY INCLOSED
overall_height2.047 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL IN
shaft_diameter0.062 INCHES NOMINAL IN
NSN3110-00-155-7458
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30-2010 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
CONE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE CUP
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
MATERIAL: STEEL OVERALL
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
CONE CORNER RADIUS0.0600 INCHES NOMINAL IN
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE CUP
CONE WIDTH0.8480 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
MATERIALSTEEL OVERALL
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
CUP WIDTH0.6875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
559-1561-044Interchangeable
interchangeable cross-reference
interchangeable
RCR07G621JSInterchangeable
interchangeable cross-reference
interchangeable
443-1466-044Interchangeable
interchangeable cross-reference
interchangeable
MP200-15Interchangeable
interchangeable cross-reference
interchangeable
2132AInterchangeable
interchangeable cross-reference
interchangeable
0907-09196Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-2010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-2010?
30-2010 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30-2010?
There are 25 known substitutes for 30-2010: 559-1561-044, RCR07G621JS, 443-1466-044 and 22 more. Substitute compatibility should be verified for your specific system.
Is 30-2010 still available?
30-2010 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-2010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026