PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30-0734-1
30-0734-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include end_item_identification: MRAP - UNIQUE NSN - MRAP NO PERMANENT WSDC IDENTIFIED, part_name_assigned_by_controlling_agency: CRANE SUPPORT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-837-2107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-0734-1
NSN: 5340-00-837-2107
FSC: 5340
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
end_item_identificationMRAP - UNIQUE NSN - MRAP NO PERMANENT WSDC IDENTIFIED
part_name_assigned_by_controlling_agencyCRANE SUPPORT
NSN5340-00-837-2107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-0734-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: FLAT W/OPEN CENTER
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.414 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: RECTANGLE, FOUR HOLES
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.414 INCHES NOMINAL IN
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
LENGTH: 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
DISTANCE BETWEEN HOLES ALONG WIDTH1.414 INCHES NOMINAL IN
HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
DISTANCE BETWEEN HOLES ALONG LENGTH1.414 INCHES NOMINAL IN
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
LENGTH2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
MATERIALSTEEL
CORNER RADIUS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
30-0734-1Interchangeable
interchangeable cross-reference
interchangeable
71464-002Interchangeable
interchangeable cross-reference
interchangeable
1009429-002Interchangeable
interchangeable cross-reference
interchangeable
26502Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-0734-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-0734-1?
30-0734-1 is a BRACKET,VEHICULAR COMPONENTS.
What parts can replace 30-0734-1?
There are 4 known substitutes for 30-0734-1: 30-0734-1, 71464-002, 1009429-002 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-0734-1?
30-0734-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-837-2107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-0734-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026