PartsTable
Technical Data Sheet
PartsTable / MRO / 30-035
30-035 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,MODULAR RECEPTACLE,ELE. Key specifications include material: STEEL COMP 1038 OVERALL, base_style: FOUR PIN INDEXING, bulb_style: T ("U" SHAPED TUBULAR), head_style: HEXAGON, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.216 INCHES NOMINAL SINGLE ACTUATOR IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0526, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30-035
NSN: 3110-00-100-0526
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1038 OVERALL
base_styleFOUR PIN INDEXING
bulb_styleT ("U" SHAPED TUBULAR)
head_styleHEXAGON
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.216 INCHES NOMINAL SINGLE ACTUATOR IN
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
constructionSLOT WOUND
shaft_length0.620 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A A
bulb_diameter1.100 INCHES NOMINAL IN
overall_width15.000 INCHES NOMINAL IN
NSN3110-00-100-0526
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30-035 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0469 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 2.8440 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.6250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0469 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
OUTSIDE DIAMETER2.8440 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5940001152678Interchangeable
interchangeable cross-reference
interchangeable
10386718Interchangeable
interchangeable cross-reference
interchangeable
12-Z-7001-2507Interchangeable
interchangeable cross-reference
interchangeable
16284Interchangeable
interchangeable cross-reference
interchangeable
ASTM-B687Interchangeable
interchangeable cross-reference
interchangeable
9325C16-3099Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-035?
30-035 is a CONNECTOR,MODULAR RECEPTACLE,ELE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30-035?
There are 23 known substitutes for 30-035: 5940001152678, 10386718, 12-Z-7001-2507 and 20 more. Substitute compatibility should be verified for your specific system.
Is 30-035 still available?
30-035 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-035

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026