PartsTable
Technical Data Sheet
PartsTable / MRO / 30-026
30-026 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include phase: SINGLE INPUT, material: PLASTIC CASE, duty_type: CONTINUOUS, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.472 INCHES MAXIMUM IN, bore_shape: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30-026
NSN: 5315-00-014-1108
FSC: 5315
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
phaseSINGLE INPUT
materialPLASTIC CASE
duty_typeCONTINUOUS
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.472 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
duty_cycleCONTINUOUS
time_delay0.005 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME
body_height0.157 INCHES MAXIMUM IN
body_length0.492 INCHES MAXIMUM IN
temp_rating40.0 AMBIENT CELSIUS
current_typeAC INPUT
NSN5315-00-014-1108
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30-026 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OVERALL
•
PIN OVERALL DIAMETER: 0.1218 INCHES MINIMUM AND 0.1223 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OVERALL
PIN OVERALL DIAMETER0.1218 INCHES MINIMUM AND 0.1223 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
30-026Interchangeable
interchangeable cross-reference
interchangeable
7210Interchangeable
interchangeable cross-reference
interchangeable
323P180Interchangeable
interchangeable cross-reference
interchangeable
202KLL2FS122Interchangeable
interchangeable cross-reference
interchangeable
25700Interchangeable
interchangeable cross-reference
interchangeable
88502X1ANG5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-026?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-026?
30-026 is a CAPACITOR,FIXED,METALLIZED,PAPER manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30-026?
There are 20 known substitutes for 30-026: 30-026, 7210, 323P180 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-026?
30-026 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1108. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-026

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026