PartsTable
Technical Data Sheet
Download PDF

30-024-003 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30-024-003: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, center_hole_diameter: 19.688 INCHES MINIMUM AND 19.750 INCHES MAXIMUM IN, cross-sectional_height: 0.194 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-058-4012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-024-003
NSN: 5331-01-058-4012
FSC: 5331 — O-ring
CAGE: 44256 — WM W NUGENT & CO INC (USA)
SPECIFICATIONS
materialRUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
center_hole_diameter19.688 INCHES MINIMUM AND 19.750 INCHES MAXIMUM IN
cross-sectional_height0.194 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
NSN5331-01-058-4012
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-024-003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.194 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 19.688 INCHES MINIMUM AND 19.750 INCHES MAXIMUM IN
•
MATERIAL: RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.194 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
CENTER HOLE DIAMETER19.688 INCHES MINIMUM AND 19.750 INCHES MAXIMUM IN
MATERIALRUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
10-590 ITEM 9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 30-024-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-024-003?
30-024-003 is a O-RING.
What parts can replace 30-024-003?
There is 1 known substitute for 30-024-003: 10-590 ITEM 9. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-024-003?
30-024-003 is cataloged in the U.S. Government catalog under NSN 5331-01-058-4012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-024-003