3-918N756-75 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

3-918N756-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 1.343 INCHES MINIMUM AND 1.367 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material_document_and_classification: MIL-P-83461/2 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-442-6608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3-918N756-75

NSN: 5331-01-442-6608
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter	1.343 INCHES MINIMUM AND 1.367 INCHES MAXIMUM IN
cross-sectional_height	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
material_document_and_classification	MIL-P-83461/2 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-01-442-6608

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-83461/2 MIL SPEC SINGLE MATERIAL RESPONSE

•

CENTER HOLE DIAMETER: 1.343 INCHES MINIMUM AND 1.367 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-83461/2 MIL SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER	1.343 INCHES MINIMUM AND 1.367 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 5

AS568-918Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS-P-83461Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83461/2-918Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-P-83461/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83461/1-918Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3-918N756-75?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3-918N756-75?

3-918N756-75 is a O-RING.

What parts can replace 3-918N756-75?

There are 5 known substitutes for 3-918N756-75: AS568-918, AMS-P-83461, M83461/2-918 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3-918N756-75?

3-918N756-75 is cataloged in the U.S. Government catalog under NSN 5331-01-442-6608. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3-918N756-75 — O-RING

Request a Quote — 3-918N756-75