PartsTable
Technical Data Sheet
PartsTable / O-RING / 3-916 V0709-90
3-916 V0709-90 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.385 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN, center_hole_diameter: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5176, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-916 V0709-90
NSN: 5331-00-167-5176
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.385 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
center_hole_diameter1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5331-00-167-5176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-916 V0709-90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 1.385 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER1.385 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5306PL1018778Interchangeable
interchangeable cross-reference
interchangeable
AN4-23AInterchangeable
interchangeable cross-reference
interchangeable
F26089-8Interchangeable
interchangeable cross-reference
interchangeable
R49388-916GInterchangeable
interchangeable cross-reference
interchangeable
MILC36044Interchangeable
interchangeable cross-reference
interchangeable
5867406775Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-916 V0709-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-916 V0709-90?
3-916 V0709-90 is a O-RING.
What parts can replace 3-916 V0709-90?
There are 23 known substitutes for 3-916 V0709-90: 5306PL1018778, AN4-23A, F26089-8 and 20 more. Substitute compatibility should be verified for your specific system.
Is 3-916 V0709-90 still available?
3-916 V0709-90 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-916 V0709-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026