PartsTable
Technical Data Sheet
Download PDF

3-914 V884-75 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3-914 V884-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-211-8213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-914 V884-75
NSN: 5331-00-211-8213
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5331-00-211-8213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-914 V884-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 9
914-19357Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D1234-946 ITEM 36Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MILR83248Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP914-19357Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3-914 V747-75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-914Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3-914 V884-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-914 V884-75?
3-914 V884-75 is a O-RING.
What parts can replace 3-914 V884-75?
There are 9 known substitutes for 3-914 V884-75: 914-19357, D1234-946 ITEM 36, MILR83248 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-914 V884-75?
3-914 V884-75 is cataloged in the U.S. Government catalog under NSN 5331-00-211-8213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-914 V884-75