3-912S0613-60 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

3-912S0613-60: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN, center_hole_diameter: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-072-8352, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3-912S0613-60

NSN: 5331-00-072-8352
FSC: 5331 — O-ring
CAGE: A0126 — LEONARDO SPA HELICOPTERS DIVISION - PRODUCTION SITE (ITA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating	60.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
center_hole_diameter	0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
cross-sectional_height	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN	5331-00-072-8352

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN

•

HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
HARDNESS RATING	60.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 4

3-912 S418-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

3-12S418-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

3-912 S613-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

3-912 S613-60Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3-912S0613-60?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3-912S0613-60?

3-912S0613-60 is a O-RING.

What parts can replace 3-912S0613-60?

There are 4 known substitutes for 3-912S0613-60: 3-912 S418-6, 3-12S418-6, 3-912 S613-6 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3-912S0613-60?

3-912S0613-60 is cataloged in the U.S. Government catalog under NSN 5331-00-072-8352. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3-912S0613-60 — O-RING

Request a Quote — 3-912S0613-60