3-910-N552-90 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

3-910-N552-90: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.755 INCHES NOMINAL IN, cross-sectional_height: 0.097 INCHES NOMINAL IN, end_item_identification: PRE-PROVISIONED NAVY ITEM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-115-8223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3-910-N552-90

NSN: 5331-01-115-8223
NIINs: 011158223, 015075448
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.755 INCHES NOMINAL IN
cross-sectional_height	0.097 INCHES NOMINAL IN
end_item_identification	PRE-PROVISIONED NAVY ITEM
material_document_and_classification	(02697)N0552 MFR REF SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency	O-RING,AIRCRAFT,MAT
NSN	5331-01-115-8223

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 160 MAXIMUM

•

CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	160 MAXIMUM
CENTER HOLE DIAMETER	0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 7

3-910 N0552-90Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

691-00910-0Reference document

Same NSN cross-reference

Reference document — Secondary reference

7115-0-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

J515CH246X0191HSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

3910N-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS568B-910Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 3-910-N552-90?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3-910-N552-90?

3-910-N552-90 is a O-RING.

What parts can replace 3-910-N552-90?

There are 7 known substitutes for 3-910-N552-90: 3-910 N0552-90, 691-00910-0, 7115-0-5 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3-910-N552-90?

3-910-N552-90 is cataloged in the U.S. Government catalog under NSN 5331-01-115-8223. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3-910-N552-90 — O-RING

Request a Quote — 3-910-N552-90