PartsTable
Technical Data Sheet
3-906N756-75 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, end_item_identification: U-2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-046-0627, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-906N756-75
NSN: 5331-01-046-0627
FSC: 5331 — O-RING
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
end_item_identificationU-2
NSN5331-01-046-0627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-906N756-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ELONGATION PERCENTAGE: 160 MAXIMUM
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONU-2
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
AS568-906Interchangeable
interchangeable cross-reference
interchangeable
S0455 3-906Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-906Interchangeable
interchangeable cross-reference
interchangeable
S5-225Interchangeable
interchangeable cross-reference
interchangeable
2048521-6Interchangeable
interchangeable cross-reference
interchangeable
12977P5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-906N756-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-906N756-75?
3-906N756-75 is a O-RING.
What parts can replace 3-906N756-75?
There are 35 known substitutes for 3-906N756-75: AS568-906, S0455 3-906, M83248/2-906 and 32 more. Substitute compatibility should be verified for your specific system.
Is 3-906N756-75 still available?
3-906N756-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-906N756-75