PartsTable
Technical Data Sheet
PartsTable / O-RING / 3-904V709-90
3-904V709-90 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5172, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-904V709-90
NSN: 5331-00-167-5172
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
special_features.
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
cross-sectional_height0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN5331-00-167-5172
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-904V709-90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.344 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.344 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
5331PL2007478Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-904Interchangeable
interchangeable cross-reference
interchangeable
379643Interchangeable
interchangeable cross-reference
interchangeable
ABS3303Interchangeable
interchangeable cross-reference
interchangeable
205-160-904Interchangeable
interchangeable cross-reference
interchangeable
1KK528Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-904V709-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-904V709-90?
3-904V709-90 is a O-RING.
What parts can replace 3-904V709-90?
There are 35 known substitutes for 3-904V709-90: 5331PL2007478, M83248-1-904, 379643 and 32 more. Substitute compatibility should be verified for your specific system.
Is 3-904V709-90 still available?
3-904V709-90 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-904V709-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026