The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MINIMUM, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, specification/standard_data: 80205-NAS1602 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-268-1250, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MINIMUM
center_hole_diameter
0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
cross-sectional_height
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
specification/standard_data
80205-NAS1602 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
5331-01-268-1250
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION
ZZZY
CENTER HOLE DIAMETER
0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
TEST DATA DOCUMENT
81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL
RUBBER ETHYLENE-PROPYLENE CLASS EPM
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-904E515-80?
3-904E515-80 is a O-RING.
What parts can replace 3-904E515-80?
There are 3 known substitutes for 3-904E515-80: NAS1612-4, LL-HX5-4417, NAS1602-904. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-904E515-80?
3-904E515-80 is cataloged in the U.S. Government catalog under NSN 5331-01-268-1250. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.