PartsTable
Technical Data Sheet
Download PDF

3-7135 — CAP,VALVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3-7135: CAP,VALVE.

The CAP,VALVE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, ring_style: EXPANDING CONCENTRIC, joint_style: INTERLOCKING JOINT, overall_width: 0.1540 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN, outside_diameter: 7.637 INCHES NOMINAL IN, fsc_application_data: COMPRESSOR ROTOR,AXIAL,TURBINE ENGINE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-121-8574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-7135
NSN: 5330-00-121-8574
NIINs: 001218574, 004663749, 010284769, 013357951
FSC: 5330 — Packing and Gasket Materials
CAGE: 99121 — PRECISION RINGS INCORPORATED (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
ring_styleEXPANDING CONCENTRIC
joint_styleINTERLOCKING JOINT
overall_width0.1540 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
outside_diameter7.637 INCHES NOMINAL IN
fsc_application_dataCOMPRESSOR ROTOR,AXIAL,TURBINE ENGINE
radial_wall_thickness0.1000 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-00-121-8574
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-7135 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: COMPRESSOR ROTOR,AXIAL,TURBINE ENGINE
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTSIDE DIAMETER: 7.637 INCHES NOMINAL IN
•
JOINT STYLE: INTERLOCKING JOINT
•
RADIAL WALL THICKNESS: 0.1000 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN
•
RING STYLE: EXPANDING CONCENTRIC
•
MATERIAL: NICKEL ALLOY OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATACOMPRESSOR ROTOR,AXIAL,TURBINE ENGINE
OVERALL WIDTH0.1540 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTSIDE DIAMETER7.637 INCHES NOMINAL IN
JOINT STYLEINTERLOCKING JOINT
RADIAL WALL THICKNESS0.1000 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN
RING STYLEEXPANDING CONCENTRIC
MATERIALNICKEL ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
9661M70P02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330PL0854377Reference document
Same NSN cross-reference
Reference document — Informative reference only
9661M70P03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3-7135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-7135?
3-7135 is a CAP,VALVE.
What parts can replace 3-7135?
There are 3 known substitutes for 3-7135: 9661M70P02, 5330PL0854377, 9661M70P03. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-7135?
3-7135 is cataloged in the U.S. Government catalog under NSN 5330-00-121-8574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-7135