PartsTable
Technical Data Sheet
PartsTable / MRO / 3-607
3-607 ✓ Verified by PartsTable
mophie · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

High-performance, heavy-duty PRO cable with a Lightning connector to charge and sync your iPhone, iPad, or iPod.<br><br><b>Pro-grade performance</b><br><br>mophie PRO USB cables are built using heavy-gauge, high-quality wire to deliver maximum power flow and performance, guaranteeing the fastest connectivity speeds and highest efficiency possible when connecting your Apple devices to any USB charger.<br><br><b>Ridiculously rugged and long-lasting</b><br><br>Durable braided nylon exterior has a smooth feel matched with unrivaled strength to protect against abrasion and tearing.<br><br><b>Limited lifetime warranty</b><br><br>mophie PRO USB cables are built to last, but we will send a replacement if yours ever gets worn out or damaged.<br><br><b>Reinforced flexibility</b><br><br>Dupont™ Kevlar® armored core adds durability to the cable while maintaining flexibility for use in tight areas and to prevent tangles.<br><br><b>Compatibility</b><br><br>MFI certified cable made for Apple product This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1719, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3-607
NSN: 5306-00-151-1719
FSC: 5306
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
colorAMBER LENS
phaseSINGLE
materialWOOD ENCLOSURE
bore_typeSTRAIGHT
body_shapeROUND
body_styleCYLINDRICAL BUSHING MOUNTED
head_styleHEXAGON
port_styleINVERTED FLARE LOCATION NOT OTHERWISE SPECIFIED
seal_width0.250 INCHES NOMINAL IN
body_length0.750 INCHES MAXIMUM IN
design_typeDRY
grip_length0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
NSN5306-00-151-1719
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3-607 · mophie ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.281 INCHES MINIMUM AND 1.312 INCHES MAXIMUM FIRST HOLE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
AN5-13Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-607?
3-607 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by mophie. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3-607?
There is 1 known substitute for 3-607: AN5-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-607?
3-607 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026