PartsTable
Technical Data Sheet
PartsTable / O-RING / 3-572-5
3-572-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The INDICATOR BIT ASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: MAN LIFT, HYD, part_name_assigned_by_controlling_agency: VALVE, FLOW CONTROL PREAS COMP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-288-2567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-572-5
NSN: 5331-00-288-2567
FSC: 5331 — O-RING
CAGE: 96046 — CRANE PUMPS & SYSTEMS PFT CORP DIV CRANE PUMPS & SYSTEM PFT CORP. (USA)
SPECIFICATIONS
end_item_identificationMAN LIFT, HYD
part_name_assigned_by_controlling_agencyVALVE, FLOW CONTROL PREAS COMP
NSN5331-00-288-2567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-572-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 9.945 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER9.945 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
236940Interchangeable
interchangeable cross-reference
interchangeable
35725Interchangeable
interchangeable cross-reference
interchangeable
A-A-2954 TY1STACL1SZ1-1/4MODELTWInterchangeable
interchangeable cross-reference
interchangeable
11-29923B32Interchangeable
interchangeable cross-reference
interchangeable
BW79823Interchangeable
interchangeable cross-reference
interchangeable
462864Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-572-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-572-5?
3-572-5 is a INDICATOR BIT ASSEMBLY.
What parts can replace 3-572-5?
There are 6 known substitutes for 3-572-5: 236940, 35725, A-A-2954 TY1STACL1SZ1-1/4MODELTW and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-572-5?
3-572-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-288-2567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-572-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026