PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3-4MUAFAFN
3-4MUAFAFN ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 1.3430 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-6582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-4MUAFAFN
NSN: 3110-00-108-6582
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width1.3430 INCHES NOMINAL IN
outer_ring_width14.0 MILLIMETERS NOMINAL MM
special_featuresECCENTRIC LOCKING COLLAR ON INNER RING ALSO DUST CAP AND RETAINING WIRE
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-108-6582
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3-4MUAFAFN · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.7500 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM IN
•
INNER RING WIDTH: 1.3430 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OUTER RING WIDTH: 14.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.7500 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM IN
INNER RING WIDTH1.3430 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
OUTER RING WIDTH14.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
SPECIAL FEATURESECCENTRIC LOCKING COLLAR ON INNER RING ALSO DUST CAP AND RETAINING WIRE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
29-32-9Interchangeable
interchangeable cross-reference
interchangeable
WPP1536Interchangeable
interchangeable cross-reference
interchangeable
541-0D6AInterchangeable
interchangeable cross-reference
interchangeable
163Interchangeable
interchangeable cross-reference
interchangeable
163AInterchangeable
interchangeable cross-reference
interchangeable
CPS4018-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-4MUAFAFN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-4MUAFAFN?
3-4MUAFAFN is a BEARING,BALL,ANNULAR.
What parts can replace 3-4MUAFAFN?
There are 19 known substitutes for 3-4MUAFAFN: 29-32-9, WPP1536, 541-0D6A and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-4MUAFAFN?
3-4MUAFAFN is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-6582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-4MUAFAFN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026