PartsTable
Technical Data Sheet
PartsTable / MRO / 3-3225
3-3225 ✓ Verified by PartsTable
InLine · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Slot bracket with 25pin Sub-D socket, for connection of e.g. a 26pin parallel port on the Mainboard. Key specifications include material: STEEL OVERALL, cone_width: 1.1875 INCHES NOMINAL IN, head_style: ROUND, design_type: NONREUSABLE, head_height: 0.094 INCHES NOMINAL IN, thread_class: 3A A.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3571, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3-3225
NSN: 3110-00-100-3571
FSC: 3110
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1875 INCHES NOMINAL IN
head_styleROUND
design_typeNONREUSABLE
head_height0.094 INCHES NOMINAL IN
thread_class3A A
body_diameter3.812 INCHES NOMINAL IN
bore_diameter2.2500 INCHES NOMINAL IN
head_diameter0.250 INCHES NOMINAL IN
thread_length0.187 INCHES MINIMUM IN
flow_directionINSIDE OUT
screw_materialSTEEL
NSN3110-00-100-3571
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3-3225 · InLine ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.2500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2651-10Interchangeable
interchangeable cross-reference
interchangeable
73917-32X1ITEM8Interchangeable
interchangeable cross-reference
interchangeable
M24135/10-10Interchangeable
interchangeable cross-reference
interchangeable
G171PC10Interchangeable
interchangeable cross-reference
interchangeable
G157PC10Interchangeable
interchangeable cross-reference
interchangeable
G101-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-3225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-3225?
3-3225 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3-3225?
There are 24 known substitutes for 3-3225: 2651-10, 73917-32X1ITEM8, M24135/10-10 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-3225?
3-3225 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-3225

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026