PartsTable
Technical Data Sheet

3-3-559 — Technical Data Sheet

✓ Verified by PartsTable
Iomega · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Iomega UltraMax Desktop Hard Drive adds secure, high capacity storage to your computer system. With its triple interface solution, the Iomega UltraMax Hard Drive delivers transfer rates of up to 800Mbits/sec and can be connected to any computer equipped with FireWire 800, FireWire 400, or Hi-Speed USB 2.0. Plus, this high performance drive includes RAID 0* for higher data throughput, a three port USB hub and three FireWire ports for expanded storage and full-system disaster recovery software for easy, worry-free backup.

The sleek compact design compliments the Mac G5 perfectly.<br><br><b>High-Performance</b> - RAID 0 built in for higher data throughput (pre-configured with RAID 0, manual confirmation possible for JBOD/Spanning and non-RAID).<br>- HFS+ so that is it natively compatible with Mac machines.<br><br><b>Convenient</b> - Three-port USB hub and three FireWire ports for more connection capabilities.<br>- High capacity storage for tons of photos, music files and videos<br><br This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-132-2699, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
3-3-559
NSN: 5340-01-132-2699
FSC: 5340
CAGE: 80376 — COMBUSTION ENGINEERING INC (USA)
SPECIFICATIONS
special_featuresQUANTITY REQUIRED 2
end_item_identification2350-01-390-4683 RECOVERY VEHICLE, FULL TRACK
part_name_assigned_by_controlling_agencyFLANGE YOKE
NSN5340-01-132-2699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-3-559 MFR: Iomega ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL CORROSION RESISTING AND STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-15083 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING AND STEEL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-15083 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
C-6-1-27Interchangeable
interchangeable cross-reference
interchangeable
C-06-01-0027Interchangeable
interchangeable cross-reference
interchangeable
3-2-559Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-3-559?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-3-559?
3-3-559 is a HOUSING ASSEMBLY,AI manufactured by Iomega.
What parts can replace 3-3-559?
There are 3 known substitutes for 3-3-559: C-6-1-27, C-06-01-0027, 3-2-559. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-3-559?
3-3-559 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-132-2699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-3-559