PartsTable
Technical Data Sheet

3-2063 — Technical Data Sheet

✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a Legrand industrial component. Key specifications include length: 30.000 INCHES NOMINAL IN, diameter: 0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, end_type: SINGLE ARMED, material: STEEL CORROSION RESISTING NEEDLE, sterility: STERILE, thickness: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-01-032-8112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-2063
NSN: 5340-01-032-8112
FSC: 5340
CAGE: 99643 — EATON AEROSPACE LLC DBA EATON AEROSPACE JACKSON (USA)
SPECIFICATIONS
length30.000 INCHES NOMINAL IN
diameter0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
end_typeSINGLE ARMED
materialSTEEL CORROSION RESISTING NEEDLE
sterilitySTERILE
thickness0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
special_featuresTHREE PACKETS OF 12 EACH, FOR A TOTAL OF 36; REPLACEMENT NSN FOR 6515-01-225-2025
surface_treatmentPASSIVATE
end_item_identificationSPECIAL TOOL AND SUPPORT EQUIP
strand_fiber_arrangementMONOFILAMENT
armed_suture_needle_style3/8 CIRCLE
needle_design_designationCUTICULAR
NSN5340-01-032-8112
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-2063 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 416
•
DIAMETER: 0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
•
THICKNESS: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIALSTEEL COMP 416
DIAMETER0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THICKNESS0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
3-2063-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
78504InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
DD44F10JVLOInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6515NCM127297InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8690HInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-2063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-2063?
3-2063 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Legrand.
What parts can replace 3-2063?
There are 5 known substitutes for 3-2063: 3-2063-2, 78504, DD44F10JVLO and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-2063?
3-2063 is cataloged in the Federal Logistics Information System under NSN 5340-01-032-8112. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-2063