PartsTable
Technical Data Sheet
Download PDF

3-16H — CLAMP,HOSE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3-16H: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, mounting_pad: NOT INCLUDED, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 0.732 INCHES NOMINAL IN, inside_diameter: 19.375 INCHES MINIMUM AND 20.250 INCHES MAXIMUM IN, style_designator: WIRE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-134-3255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-16H
NSN: 5340-00-134-3255
NIINs: 001343255, 005017062, 005707344
FSC: 5340 — Hardware, Commercial
CAGE: 26863 — ALL-STATES INC. (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialPLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYCAPROLACTAM OR PLASTIC POLYUNDECANOAMIDE LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.500 INCHES NOMINAL IN
overall_length0.732 INCHES NOMINAL IN
inside_diameter19.375 INCHES MINIMUM AND 20.250 INCHES MAXIMUM IN
style_designatorWIRE
material_thickness0.060 INCHES NOMINAL IN
mounting_hole_size0.203 INCHES NOMINAL IN
fastening_device_typeSLOTTED HEXAGON HEAD SCREW
inside_diameter/arch_length0.172 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.172 INCHES NOMINAL IN
NSN5340-00-134-3255
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-16H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.579 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.391 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.579 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLACK
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.391 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.178 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
660-3ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2652762-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
3-16HNReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3-16H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-16H?
3-16H is a CLAMP,HOSE.
What parts can replace 3-16H?
There are 3 known substitutes for 3-16H: 660-3A, 2652762-1, 3-16HN. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-16H?
3-16H is cataloged in the U.S. Government catalog under NSN 5340-00-134-3255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-16H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.