PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3-16DIAX30-1-2LG
3-16DIAX30-1-2LG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,NONMETALLIC ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLID, overall_length: 30.500 INCHES NOMINAL IN, style_designator: STRIP, fabrication_method: SOLID, cross-sectional_shape_style: CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-484-1815, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-16DIAX30-1-2LG
NSN: 5330-00-484-1815
FSC: 5330
CAGE: 08853 — KUEHN N L CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLID
overall_length30.500 INCHES NOMINAL IN
style_designatorSTRIP
fabrication_methodSOLID
cross-sectional_shape_styleCIRCULAR
cross_section_outside_diameter0.187 INCHES NOMINAL IN
NSN5330-00-484-1815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3-16DIAX30-1-2LG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
FABRICATION METHOD: SOLID
•
STYLE DESIGNATOR: STRIP
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CONSTRUCTION: SOLID
•
CROSS SECTION OUTSIDE DIAMETER: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECIRCULAR
FABRICATION METHODSOLID
STYLE DESIGNATORSTRIP
MATERIALRUBBER SYNTHETIC OVERALL
CONSTRUCTIONSOLID
CROSS SECTION OUTSIDE DIAMETER0.187 INCHES NOMINAL IN
OVERALL LENGTH30.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
34797Interchangeable
interchangeable cross-reference
interchangeable
61023Interchangeable
interchangeable cross-reference
interchangeable
A-A-517Interchangeable
interchangeable cross-reference
interchangeable
43570Interchangeable
interchangeable cross-reference
interchangeable
195163Interchangeable
interchangeable cross-reference
interchangeable
195163PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-16DIAX30-1-2LG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-16DIAX30-1-2LG?
3-16DIAX30-1-2LG is a SEAL,NONMETALLIC ROUND SECTION.
What parts can replace 3-16DIAX30-1-2LG?
There are 8 known substitutes for 3-16DIAX30-1-2LG: 34797, 61023, A-A-517 and 5 more. Substitute compatibility should be verified for your specific system.
Is 3-16DIAX30-1-2LG still available?
3-16DIAX30-1-2LG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-16DIAX30-1-2LG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026