Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: STEEL, body_style: W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE, body_width: 0.625 INCHES NOMINAL IN, case_style: RECESSED, flow_style: TWO WAY TWO PORT 90 DEGREE PLUG TURN, head_style: HEXAGON. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-073-3344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→3-0055
NSN:5330-00-073-3344 FSC:5330 CAGE:59431 — TECUMSEH PRODUCTS COMPANY LLC DIV TECUMSEH COMPRESSOR CO. LLC (USA)
SPECIFICATIONS
material
STEEL
body_style
W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE
body_width
0.625 INCHES NOMINAL IN
case_style
RECESSED
flow_style
TWO WAY TWO PORT 90 DEGREE PLUG TURN
head_style
HEXAGON
link_style
EYE ENDS
seal_width
0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
body_height
2.687 INCHES NOMINAL IN
body_length
0.620 INCHES MAXIMUM IN
design_type
SINGLE CENTRALLY LOCATED HOLE
head_height
0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
NSN
5330-00-073-3344
COMPONENT DIAGRAM
KEY FEATURES
•
SIDE RADIUS FROM GASKET CENTER: 0.562 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
BOLT CIRCLE DIAMETER: 1.625 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.312 INCHES MINIMUM AND 0.322 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 2
•
STYLE DESIGNATOR: NON-CIRCULAR
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SIDE RADIUS FROM GASKET CENTER
0.562 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS
0.312 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
MATERIAL
ASBESTOS AND RUBBER SYNTHETIC OVERALL
BOLT CIRCLE DIAMETER
1.625 INCHES NOMINAL IN
HOLE DIAMETER
0.312 INCHES MINIMUM AND 0.322 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-0055?
3-0055 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Nathan. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3-0055?
There are 22 known substitutes for 3-0055: 138017, 12805A, 827441 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-0055?
3-0055 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-073-3344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.