3/8-16X1 1/4 — BOLT,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

3/8-16X1 1/4: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include thread_length: 1.25 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, end_item_identification: HT-7M, nominal_thread_diameter: 0.375 INCHES IN, thread_quantity_per_inch: 16, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5305-00-717-5467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3/8-16X1 1/4

NSN: 5305-00-717-5467
NIINs: 007175467, 015173456, 016548861, 016891485
FSC: 5305 — Screws
CAGE: 9H691 — ARLINGTON FASTNER CO (USA)

SPECIFICATIONS

thread_length	1.25 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
end_item_identification	HT-7M
nominal_thread_diameter	0.375 INCHES IN
thread_quantity_per_inch	16
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
part_name_assigned_by_controlling_agency	BOLT
NSN	5305-00-717-5467

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.250 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL

•

NOMINAL THREAD DIAMETER: 0.375 INCHES IN

•

HEAD STYLE: HEXAGON

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH	1.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	1.000 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER	0.375 INCHES IN
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
WIDTH BETWEEN FLATS	0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SURFACE TREATMENT	PASSIVATE OVERALL

SUBSTITUTES & CROSS-REFERENCES 9

ASC1541675Reference document

Same NSN cross-reference

Reference document — Secondary reference

WG1070148Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

99935505MSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

28332Reference document

Same NSN cross-reference

Reference document — Secondary reference

470467PCLN141Reference document

Same NSN cross-reference

Reference document — Secondary reference

EJ-11595Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3/8-16X1 1/4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3/8-16X1 1/4?

3/8-16X1 1/4 is a BOLT,MACHINE.

What parts can replace 3/8-16X1 1/4?

There are 9 known substitutes for 3/8-16X1 1/4: ASC1541675, WG1070148, 99935505M and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3/8-16X1 1/4?

3/8-16X1 1/4 is cataloged in the U.S. Government catalog under NSN 5305-00-717-5467. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3/8-16X1 1/4 — BOLT,MACHINE

Request a Quote — 3/8-16X1 1/4