PartsTable
Technical Data Sheet

3/4-16NF-LH — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3/4-16NF-LH: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.375 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, hardness_rating: 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-1308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3/4-16NF-LH
NSN: 5310-00-167-1308
FSC: 5310 — Nuts and Washers
CAGE: 31849 — GREGORY ENGINEERING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.375 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
hardness_rating80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionLEFT-HAND
countersink_angle110.0 DEGREES NOMINAL BOTH ENDS
surface_treatmentCADMIUM OVERALL
width_across_flats1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED
NSN5310-00-167-1308
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3/4-16NF-LH · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND A GRADE
•
NUT HEIGHT: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HARDNESS RATING80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND A GRADE
NUT HEIGHT0.375 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
COUNTERSINK ANGLE110.0 DEGREES NOMINAL BOTH ENDS
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
6026-8307-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
AN316-12LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3/4-16NF-LH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3/4-16NF-LH?
3/4-16NF-LH is a NUT,PLAIN,HEXAGON.
What parts can replace 3/4-16NF-LH?
There are 3 known substitutes for 3/4-16NF-LH: 6026-8307-2, FF-N-836, AN316-12L. Substitute compatibility should be verified for your specific system.
What is the NSN for 3/4-16NF-LH?
3/4-16NF-LH is cataloged in the U.S. Government catalog under NSN 5310-00-167-1308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3/4-16NF-LH