PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2X1017
2X1017 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 65.00 MILLIMETERS NOMINAL MM, overall_width: 33.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2X1017
NSN: 3110-00-155-6796
FSC: 3110
CAGE: 95201 — NAPCO INTERNATIONAL LLC DBA NAPCO INTERNATIONAL INC (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter65.00 MILLIMETERS NOMINAL MM
overall_width33.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorLOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
overall_outside_diameter140.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6796
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2X1017 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL INNER RING
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL INNER RING
OVERALL WIDTH33.0 MILLIMETERS NOMINAL MM
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
MATERIALSTEEL BALL
MATERIALSTEEL SHIELD
MATERIALSTEEL OUTER RING
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
441Interchangeable
interchangeable cross-reference
interchangeable
47-313Interchangeable
interchangeable cross-reference
interchangeable
882T2Interchangeable
interchangeable cross-reference
interchangeable
117438HInterchangeable
interchangeable cross-reference
interchangeable
399798Interchangeable
interchangeable cross-reference
interchangeable
150 7.5MMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2X1017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2X1017?
2X1017 is a BEARING,BALL,ANNULAR.
What parts can replace 2X1017?
There are 11 known substitutes for 2X1017: 441, 47-313, 882T2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2X1017?
2X1017 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2X1017

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026