PartsTable
Technical Data Sheet
Download PDF

2W1AL13-10-32 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2W1AL13-10-32: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.032 INCHES NOMINAL IN, hole_diameter: 0.203 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN, overall_diameter: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-754-1834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2W1AL13-10-32
NSN: 5310-00-754-1834
FSC: 5310 — Nuts and Washers
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.032 INCHES NOMINAL IN
hole_diameter0.203 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
overall_diameter0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ A 225/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-754-1834
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2W1AL13-10-32 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ A 225/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ANODIZE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.203 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ A 225/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTANODIZE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.203 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
THICKNESS0.032 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
511846-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
CVC754-220D13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL0150357Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2W1AL13-10-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2W1AL13-10-32?
2W1AL13-10-32 is a WASHER,FLAT.
What parts can replace 2W1AL13-10-32?
There are 3 known substitutes for 2W1AL13-10-32: 511846-4, CVC754-220D13, 5310PL0150357. Substitute compatibility should be verified for your specific system.
What is the NSN for 2W1AL13-10-32?
2W1AL13-10-32 is cataloged in the U.S. Government catalog under NSN 5310-00-754-1834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2W1AL13-10-32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.