PartsTable
Technical Data Sheet
Download PDF

2SE9058 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2SE9058: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 4.9995 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM IN, overall_width: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: ALL CORNER RADII 0.0600 IN TO 0.0800 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-158-6234, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2SE9058
NSN: 3110-00-158-6234
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 45014 — ORANGE ROLLER BEARING CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter4.9995 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM IN
overall_width1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresALL CORNER RADII 0.0600 IN TO 0.0800 IN. IN
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter6.4995 INCHES MINIMUM AND 6.5005 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-158-6234
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2SE9058 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 6.4995 INCHES MINIMUM AND 6.5005 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 4.9995 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER6.4995 INCHES MINIMUM AND 6.5005 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESALL CORNER RADII 0.0600 IN TO 0.0800 IN. IN
BORE DIAMETER4.9995 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2SE9058?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2SE9058?
2SE9058 is a BEARING,ROLLER,NEEDLE.
What is the NSN for 2SE9058?
2SE9058 is cataloged in the U.S. Government catalog under NSN 3110-00-158-6234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2SE9058

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.