PartsTable
Technical Data Sheet
Download PDF

2P1117 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2P1117: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.750 INCHES MAXIMUM IN, bearing_type: SLEEVE SHAFT, actuator_type: RECESSED DRIVE WITH SLOT, body_diameter: 1.280 INCHES MAXIMUM IN, overall_length: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-371-6629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2P1117
NSN: 5905-00-371-6629
NIINs: 003716629, 012275985
FSC: 5905 — Resistor
CAGE: 11237 — CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.750 INCHES MAXIMUM IN
bearing_typeSLEEVE SHAFT
actuator_typeRECESSED DRIVE WITH SLOT
body_diameter1.280 INCHES MAXIMUM IN
overall_length1.375 INCHES NOMINAL IN
mounting_methodLOCKING BUSHING
overall_diameter1.280 INCHES MAXIMUM IN
section_quantity1
features_providedPANEL SEAL AND SHAFT SEAL
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius0.531 INCHES NOMINAL IN
NSN5905-00-371-6629
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 2P1117 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: AT 9 OCLOCK
•
BODY DIAMETER: 1.280 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONAT 9 OCLOCK
BODY DIAMETER1.280 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
SECTION QUANTITY1
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER1.280 INCHES MAXIMUM IN
MOUNTING METHODLOCKING BUSHING
SUBSTITUTES & CROSS-REFERENCES 1
RA20TAS8103AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2P1117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2P1117?
2P1117 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2P1117?
There is 1 known substitute for 2P1117: RA20TAS8103A. Substitute compatibility should be verified for your specific system.
What is the NSN for 2P1117?
2P1117 is cataloged in the U.S. Government catalog under NSN 5905-00-371-6629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2P1117

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.