PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2N338
2N338 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The TRANSISTOR is a the manufacturer industrial component. Key specifications include overall_length: 0.260 INCHES MAXIMUM IN, transfer_ratio: 30.0 NOMINAL SMALL-SIGNAL SHORT-CIRCUIT FORWARD CURRENT TRANSFER RATIO, COMMON-EMITTER, mounting_method: TERMINAL, terminal_length: 1.500 INCHES MINIMUM IN, overall_diameter: 0.370 INCHES MAXIMUM IN, special_features: JUNCTION PATTERN ARRANGEMENT: PNP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-068-7422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2N338
NSN: 5961-00-068-7422
FSC: 5961
CAGE: 03877 — GILBERT ENGINEERING CO INC/INCON SUB OF TRANSITRON ELECTRONIC CORP (USA)
SPECIFICATIONS
overall_length0.260 INCHES MAXIMUM IN
transfer_ratio30.0 NOMINAL SMALL-SIGNAL SHORT-CIRCUIT FORWARD CURRENT TRANSFER RATIO, COMMON-EMITTER
mounting_methodTERMINAL
terminal_length1.500 INCHES MINIMUM IN
overall_diameter0.370 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: PNP
features_providedHERMETICALLY SEALED CASE
internal_configurationJUNCTION CONTACT
semiconductor_materialGERMANIUM
terminal_circle_diameter0.200 INCHES NOMINAL IN
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
specification/standard_data80131-2N338 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5961-00-068-7422
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 2N338 MFR OEM TRANSISTOR
KEY FEATURES
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 300.0 CELSIUS JUNCTION300.0 CELSIUS JUNCTION DEGC
•
CURRENT RATING PER CHARACTERISTIC: 20.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC20.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC
•
POWER RATING PER CHARACTERISTIC: 125.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION125.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION
•
TERMINAL CIRCLE DIAMETER: 0.200 INCHES NOMINAL0.200 INCHES NOMINAL IN
•
TERMINAL TYPE AND QUANTITY: 3 UNINSULATED WIRE LEAD3 UNINSULATED WIRE LEAD
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 45.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 45.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 1.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN1.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
•
OVERALL DIAMETER: 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM1.500 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT300.0 CELSIUS JUNCTION300.0 CELSIUS JUNCTION DEGC
CURRENT RATING PER CHARACTERISTIC20.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC20.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC
POWER RATING PER CHARACTERISTIC125.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION125.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION
TERMINAL CIRCLE DIAMETER0.200 INCHES NOMINAL0.200 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY3 UNINSULATED WIRE LEAD3 UNINSULATED WIRE LEAD
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC45.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 45.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 1.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN1.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
OVERALL DIAMETER0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
TERMINAL LENGTH1.500 INCHES MINIMUM1.500 INCHES MINIMUM IN
SEMICONDUCTOR MATERIALSILICONSILICON
MOUNTING METHODTERMINALTERMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
SMC333845-1Interchangeable
interchangeable cross-reference
interchangeable
2199900013Interchangeable
interchangeable cross-reference
interchangeable
2N338Interchangeable
interchangeable cross-reference
interchangeable
JAN2N338Interchangeable
interchangeable cross-reference
interchangeable
13-116007-1Interchangeable
interchangeable cross-reference
interchangeable
414828-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 2N338?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2N338?
2N338 is a TRANSISTOR.
What parts can replace 2N338?
There are 11 known substitutes for 2N338: SMC333845-1, 2199900013, 2N338 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2N338?
2N338 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-068-7422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2N338

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026