PartsTable
Technical Data Sheet
Download PDF

2N0828-00 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2N0828-00: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN, overall_height: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, hardness_rating: 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM, outside_diameter: 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, material_thickness: 0.0095 INCHES MINIMUM AND 0.0105 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-187-9796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2N0828-00
NSN: 5310-00-187-9796
FSC: 5310 — Nuts and Washers
CAGE: 58312 — MIL-TECH MFG INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
overall_height0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
hardness_rating48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM
outside_diameter1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
material_thickness0.0095 INCHES MINIMUM AND 0.0105 INCHES MAXIMUM IN
material_document_and_classification1F463,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-187-9796
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2N0828-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: 1F463,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0095 INCHES MINIMUM AND 0.0105 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
HARDNESS RATING48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION1F463,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0095 INCHES MINIMUM AND 0.0105 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
2N828Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2N0828-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2N0828-00?
2N0828-00 is a WASHER,SPRING TENSION.
What parts can replace 2N0828-00?
There is 1 known substitute for 2N0828-00: 2N828. Substitute compatibility should be verified for your specific system.
What is the NSN for 2N0828-00?
2N0828-00 is cataloged in the U.S. Government catalog under NSN 5310-00-187-9796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2N0828-00

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.