2MM9106WICRDUM — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

2MM9106WICRDUM: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON INNER RING, bore_diameter: 1.1811 INCHES NOMINAL IN, contact_angle: 15.0 DEGREES NOMINAL, overall_width: 0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-082-1308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2MM9106WICRDUM

NSN: 3110-00-082-1308
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)

SPECIFICATIONS

material	PLASTIC POLYAMIDE NYLON INNER RING
bore_diameter	1.1811 INCHES NOMINAL IN
contact_angle	15.0 DEGREES NOMINAL
overall_width	0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN
load_direction	ANGULAR
surface_finish	GROUND
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES
overall_outside_diameter	2.1654 INCHES NOMINAL IN
standard_tolerance_designation	ABEC NO.7
NSN	3110-00-082-1308

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES

•

OVERALL OUTSIDE DIAMETER: 2.1654 INCHES NOMINAL IN

•

CONTACT ANGLE: 15.0 DEGREES NOMINAL

•

LOAD DIRECTION: ANGULAR

•

STANDARD TOLERANCE DESIGNATION: ABEC NO.7

•

BORE DIAMETER: 1.1811 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	GROUND
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES
OVERALL WIDTH	0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER	2.1654 INCHES NOMINAL IN
CONTACT ANGLE	15.0 DEGREES NOMINAL
LOAD DIRECTION	ANGULAR
STANDARD TOLERANCE DESIGNATION	ABEC NO.7
BORE DIAMETER	1.1811 INCHES NOMINAL IN
MATERIAL	STEEL OVERALL
MATERIAL	PLASTIC POLYAMIDE NYLON INNER RING

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 3

2MM9106WIDUMReference document

Same NSN cross-reference

Reference document — Secondary reference

2MM9106WICRC5Reference document

Same NSN cross-reference

Reference document — Secondary reference

2MM9106WICRReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2MM9106WICRDUM?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2MM9106WICRDUM?

2MM9106WICRDUM is a BEARING,BALL,DUPLEX.

What parts can replace 2MM9106WICRDUM?

There are 3 known substitutes for 2MM9106WICRDUM: 2MM9106WIDUM, 2MM9106WICRC5, 2MM9106WICR. Substitute compatibility should be verified for your specific system.

What is the NSN for 2MM9106WICRDUM?

2MM9106WICRDUM is cataloged in the U.S. Government catalog under NSN 3110-00-082-1308. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2MM9106WICRDUM — BEARING,BALL,DUPLEX

Request a Quote — 2MM9106WICRDUM